For years, the two most popular methods for internal scanning: agent-based and network-based were considered to be about equal in value, each bringing its own strengths to bear. However, with remote working now the norm in most if not all workplaces, it feels a lot more like agent-based scanning is a must, while network-based scanning is an optional extra.
This article will go in-depth on the strengths and weaknesses of each approach, but let’s wind it back a second for those who aren’t sure why they should even do internal scanning in the first place.
Why should you perform internal vulnerability scanning?
While external vulnerability scanning can give a great overview of what you look like to a hacker, the information that can be gleaned without access to your systems can be limited. Some serious vulnerabilities can be discovered at this stage, so it’s a must for many organizations, but that’s not where hackers stop.
Techniques like phishing, targeted malware, and watering-hole attacks all contribute to the risk that even if your externally facing systems are secure, you may still be compromised by a cyber-criminal. Furthermore, an externally facing system that looks secure from a black-box perspective may have severe vulnerabilities that would be revealed by a deeper inspection of the system and software being run.
This is the gap that internal vulnerability scanning fills. Protecting the inside like you protect the outside provides a second layer of defence, making your organization significantly more resilient to a breach. For this reason, it’s also seen as a must for many organizations.
If you’re reading this article, though, you are probably already aware of the value internal scanning can bring but you’re not sure which type is right for your business. This guide will help you in your search.
The different types of internal scanner
Generally, when it comes to identifying and fixing vulnerabilities on your internal network, there are two competing (but not mutually exclusive) approaches: network-based internal vulnerability scanning and agent-based internal vulnerability scanning. Let’s go through each one.
Network-based scanning explained
Network-based internal vulnerability scanning is the more traditional approach, running internal network scans on a box known as a scanning ‘appliance’ that sits on your infrastructure (or, more recently, on a Virtual Machine in your internal cloud).
Agent-based scanning explained
Agent-based internal vulnerability scanning is considered the more modern approach, running ‘agents’ on your devices that report back to a central server.
While “authenticated scanning” allows network-based scans to gather similar levels of information to an agent-based scan, there are still benefits and drawbacks to each approach.
Implementing this badly can cause headaches for years to come. So for organizations looking to implement internal vulnerability scans for the first time, here’s some helpful insight.
Which internal scanner is better for your business?
Coverage
It almost goes without saying, but agents can’t be installed on everything.
Devices like printers; routers and switches; and any other specialized hardware you may have on your network, such as HP Integrated Lights-Out, which is common to many large organizations who manage their own servers, may not have an operating system that’s supported by an agent. However, they will have an IP address, which means you can scan them via a network-based scanner.
This is a double-edged sword in disguise, though. Yes, you are scanning everything, which immediately sounds better. But how much value do those extra results to your breach prevention efforts bring? Those printers and HP iLO devices may infrequently have vulnerabilities, and only some of these may be serious. They may assist an attacker who is already inside your network, but will they help one break into your network to begin with? Probably not.
Meanwhile, will the noise that gets added to your results in the way of additional SSL cipher warnings, self-signed certificates, and the extra management overheads of including them to the whole process be worthwhile?
Clearly, the desirable answer over time is yes, you would want to scan these assets; defence in depth is a core concept in cyber security. But security is equally never about the perfect scenario. Some organizations don’t have the same resources that others do, and have to make effective decisions based on their team size and budgets available. Trying to go from scanning nothing to scanning everything could easily overwhelm a security team trying to implement internal scanning for the first time, not to mention the engineering departments responsible for the remediation effort.
Overall, it makes sense to consider the benefits of scanning everything vs. the workload it might entail deciding whether it’s right for your organization or, more importantly, right for your organization at this point in time.
Looking at it from a different angle, yes, network-based scans can scan everything on your network, but what about what’s not on your network?
Some company laptops get handed out and then rarely make it back into the office, especially in organizations with heavy field sales or consultancy operations. Or what about companies for whom remote working is the norm rather than the exception? Network-based scans won’t see it if it’s not on the network, but with agent-based vulnerability scanning, you can include assets in monitoring even when they are offsite.
So if you’re not using agent-based scanning, you might well be gifting the attacker the one weak link they need to get inside your corporate network: an un-patched laptop that might browse a malicious website or open a malicious attachment. Certainly more useful to an attacker than a printer running a service with a weak SSL cipher.
The winner: Agent-based scanning, because it will allow you broader coverage and include assets not on your network – key while the world adjusts to a hybrid of office and remote working.
If you’re looking for an agent-based scanner to try, Intruder uses an industry-leading scanning engine that’s used by banks and governments all over the world. With over 67,000 local checks available for historic vulnerabilities, and new ones being added on a regular basis, you can be confident of its coverage. You can try Intruder’s internal vulnerability scanner for free by visiting their website.
Attribution
On fixed-IP networks such as an internal server or external-facing environments, identifying where to apply fixes for vulnerabilities on a particular IP address is relatively straightforward.
In environments where IP addresses are assigned dynamically, though (usually, end-user environments are configured like this to support laptops, desktops, and other devices), this can become a problem. This also leads to inconsistencies between monthly reports and makes it difficult to track metrics in the remediation process.
Reporting is a key component of most vulnerability management programs, and senior stakeholders will want you to demonstrate that vulnerabilities are being managed effectively.
Imagine taking a report to your CISO, or IT Director, showing that you have an asset intermittently appearing on your network with a critical weakness. One month it’s there, the next it’s gone, then it’s back again…
In dynamic environments like this, using agents that are each uniquely tied to a single asset makes it simpler to measure, track and report on effective remediation activity without the ground shifting beneath your feet.
The winner: Agent-based scanning, because it will allow for more effective measurement and reporting of your remediation efforts.
Discovery
Depending on how archaic or extensive your environments are or what gets brought to the table by a new acquisition, your visibility of what’s actually in your network in the first place may be very good or very poor.
One key advantage to network-based vulnerability scanning is that you can discover assets you didn’t know you had. Not to be overlooked, asset management is a precursor to effective vulnerability management. You can’t secure it if you don’t know you have it!
Similar to the discussion around coverage, though, if you’re willing to discover assets on your network, you must also be willing to commit resources to investigate what they are, and tracking down their owners. This can lead to ownership tennis where nobody is willing to take responsibility for the asset, and require a lot of follow-up activity from the security team. Again it simply comes down to priorities. Yes, it needs to be done, but the scanning is the easy bit; you need to ask yourself if you’re also ready for the follow-up.
The winner: Network-based scanning, but only if you have the time and resources to manage what is uncovered!
Deployment
Depending on your environment, the effort of implementation and ongoing management for properly authenticated network-based scans will be greater than that of an agent-based scan. However, this heavily depends on how many operating systems you have vs. how complex your network architecture is.
Simple Windows networks allow for the easy rollout of agents through Group Policy installs. Similarly, a well-managed server environment shouldn’t pose too much of a challenge.
The difficulties of installing agents occur where there’s a great variety of operating systems under management, as this will require a heavily tailored rollout process. Modifications to provisioning procedures will also need to be taken into account to ensure that new assets are deployed with the agents already installed or quickly get installed after being brought online. Modern server orchestration technologies like Puppet, Chef, and Ansible can really help here.
Deploying network-based appliances on the other hand requires analysis of network visibility, i.e. from “this” position in the network, can we “see” everything else in the network, so the scanner can scan everything?
It sounds simple enough, but as with many things in technology, it’s often harder in practice than it is on paper, especially when dealing with legacy networks or those resulting from merger activity. For example, high numbers of VLANs will equate to high amounts of configuration work on the scanner.
For this reason, designing a network-based scanning architecture relies on accurate network documentation and understanding, which is often a challenge, even for well-resourced organizations. Sometimes, errors in understanding up-front can lead to an implementation that doesn’t match up to reality and requires subsequent “patches” and the addition of further appliances. The end result can often be that it’s just as difficult to maintain patchwork despite original estimations seeming simple and cost-effective.
The winner: It depends on your environment and the infrastructure team’s availability.
Maintenance
Due to the situation explained in the previous section, practical considerations often mean you end up with multiple scanners on the network in a variety of physical or logical positions. This means that when new assets are provisioned or changes are made to the network, you have to make decisions on which scanner will be responsible and make changes to that scanner. This can place an extra burden on an otherwise busy security team. As a rule of thumb, complexity, wherever not necessary, should be avoided.
Sometimes, for these same reasons, appliances need to be located in places where physical maintenance is troublesome. This could be either a data center or a local office or branch. Scanner not responding today? Suddenly the SecOps team is picking straws for who has to roll up their sleeves and visit the datacenter.
Also, as any new VLANs are rolled out, or firewall and routing changes alter the layout of the network, scanning appliances need to be kept in sync with any changes made.
The winner: Agent-based scanners are much easier to maintain once installed.
Concurrency and scalability
While the concept of sticking a box on your network and running everything from a central point can sound alluringly simple, if you are so lucky to have such a simple network (many aren’t), there are still some very real practicalities to consider around how that scales.
Take, for example, the recent vulnerability Log4shell, which impacted Log4j – a logging tool used by millions of computers worldwide. With such wide exposure, it’s safe to say almost every security team faced a scramble to determine whether they were affected or not.
Even with the ideal scenario of having one centralized scanning appliance, the reality is this box cannot concurrently scan a huge number of machines. It may run a number of threads, but realistically processing power and network-level limitations means you could be waiting a number of hours before it comes back with the full picture (or, in some cases, a lot longer).
Agent-based vulnerability scanning, on the other hand, spreads the load to individual machines, meaning there’s less of a bottleneck on the network, and results can be gained much more quickly.
There’s also the reality that your network infrastructure may be ground to a halt by concurrently scanning all of your assets across the network. For this reason, some network engineering teams limit scanning windows to after-hours when laptops are at home and desktops are turned off. Test environments may even be powered down to save resources.
Intruder automatically scans your internal systems as soon as new vulnerabilities are released, allowing you to discover and eliminate security holes in your most exposed systems promptly and effectively.
The winner: Agent-based scanning can overcome common problems that are not always obvious in advance, while relying on network scanning alone can lead to major gaps in coverage.
Summary
With the adoption of any new system or approach, it pays to do things incrementally and get the basics right before moving on to the next challenge. This is a view that the NCSC, the UK’s leading authority on cyber security, shares as it frequently publishes guidance around getting the basics right.
This is because, broadly speaking, having the basic 20% of defences implemented effectively will stop 80% of the attackers out there. In contrast, advancing into 80% of the available defences but implementing them badly will likely mean you struggle to keep out the classic kid-in-bedroom scenario we’ve seen too much of in recent years.
For those organizations on an information security journey, looking to roll out vulnerability scanning solutions, here are some further recommendations:
Step 1 — Ensure you have your perimeter scanning sorted with a continuous and proactive approach. Your perimeter is exposed to the internet 24/7, and so there’s no excuse for organizations who fail to respond quickly to critical vulnerabilities here.
Step 2 — Next, focus on your user environment. The second most trivial route into your network will be a phishing email or drive-by download that infects a user workstation, as this requires no physical access to any of your locations. With remote work being the new norm, you need to be able to have a watch over all laptops and devices, wherever they may be. From the discussion above, it’s fairly clear that agents have the upper hand in this department.
Step 3 — Your internal servers, switches and other infrastructure will be the third line of defence, and this is where internal network appliance-based scans can make a difference. Internal vulnerabilities like this can help attackers elevate their privileges and move around inside your network, but it won’t be how they get in, so it makes sense to focus here last.
Hopefully, this article casts some light on what is never a trivial decision and can cause lasting pain points for organizations with ill-fitting implementations. There are pros and cons, as always, no one-size-fits-all, and plenty of rabbit holes to avoid. But, by considering the above scenarios, you should be able to get a feel for what is right for your organization.
Source: thehackernews.com/