Ford is closing out September with the sad task of alerting owners to five different recalls, two of them camera related. The first is a safety compliance recall affecting 620,246 units of 12 models from the 2020 model year: Edge, Escape, Expedition, Explorer, F-150 and Super Duty, Mustang, Ranger, and Transit, plus the Lincoln Corsair, MKX, and Nautilus. On these vehicles, the circuit board in the rearview camera suffers from insufficient electrical conductivity. The issue can cause the resulting image to not appear or to be distorted, which can lead to an accident while reversing. Ford will begin notifying owners as of November 7 to get their vehicles to dealers for replacement of the rearview camera. The internal Ford reference for this recall is 20C19.
The second camera-related issue affects the 2020 and 2021 Ford Explorer, Lincoln Corsair and Lincoln Aviator with the 360-degree camera. Technically, if you own a 2021 Explorer that only has a rearview camera and not a 360-degree camera, neither the above recall nor this one apply to you, but it’s probably better safe than sorry here. There are 354,330 crossovers covered by this action. A video output issue could cause the displayed image to cut out, increasing the chances of a reversing accident. Ford will notify dealers starting October 7, the fix being to have a dealer update the Image Processing Module software. The NHTSA campaign number for this recall is 21V735, Ford’s internal reference number is 21S44.
The F-250 and F-350 Super Duty are in for another recalls thanks to potentially improper welds on the front axle’s wheel end yoke. A bad weld could alter steering performance, getting the truck to pull left or right, or change the sensitivity of the steering. There are 9,628 affected trucks in the U.S. and 961 in Canada. Dealers will replace the axle assembly if any bad welds are found. Ford’s reference number for this is 20S56.
The fourth recall affects 38,005 Mustangs in the U.S. and another 2,873 Mustangs in Canada and Mexico from the 2020 model year. In this instance, the brake pedal bracket might fracture during sudden stopping, which can decrease brake pressure and increase the chances of an accident. Ford’s internal reference for this recall is 20S52, the fix being to have a dealer replace the brake pedal bracket assembly.
Finally, 126,033 units of the 2011 to 2013 Explorer are being recalled over a potential suspension issue. Certain vehicles might have had a rear toe link cross-axis ball joint replaced by one that could seize up. If that happens, there’s a chance the rear suspension’s toe link could fracture. Ford is still determining how many vehicles might be affected and where they’re located, but at the moment it includes Explorers that are registered, have ever been registered, or were sold in 22 states and the District of Columbia: Connecticut, Delaware, Illinois, Indiana, Iowa, Kentucky, Maine, Maryland, Massachusetts, Michigan, Minnesota, Missouri, New Hampshire, New Jersey, New York, Ohio, Pennsylvania, Rhode Island, Vermont, Virginia, West Virginia, and Wisconsin. This is an addition to two other ongoing recall campaigns. Ford will inform owners by mail starting November 1. The NHTSA campaign number is 21V-746, Ford’s internal reference number is 21S43.
For more info on any of these, you can call Ford’s toll-free line at 866-436-7332, or contact your dealer.
Related video: